- Press the middle button on your ConnectedRide Com U1 for 5 seconds until you hear a voice message "Intercom pairing".
- You see a red flashing light combined with a double beep.
- At the same time on the communication system V3, press the on/off button and simultaneously press the (+) button until the flashing speed of the green LED lamp has increased once.
- The pairing was successful when you hear a confirmation tone on both devices and a double flashing LED in blue can be seen on the ConnectedRide Com U1 and the green LED illuminates for 1 second on the communication system V3.
- During the connection, the LED of the ConnectedRide Com U1 flashes blue twice every 2 seconds.
Note:
Please note that rider-to-rider Bluetooth communication is not possible over a long range with a ConnectedRide Com U1 and a communication system V3.
The communication system V3 is designed as a rider-passenger system. Using this type of intercom is therefore only recommended if you want to talk to your passenger.