Loading

1499

For the S 1000 RR (from 2023 model year): What requirements must be met to use the “Brake Slide Assist” function?

These requirements must be met to use the “Brake Slide Assist” function:

Riding mode Pro must be available
ABS Pro setting on slick
Speed ≥ greater than 50 km/h
Deceleration > 5.5 m/s²
Strong actuation of the foot brake, slip = 50%.
This results in a steering angle of 8-12°
Take the maximum load off the rear wheel, among other things through a forward seat position.

Did this answer your question?

Recommended articles

57248

How can I start my BMW Motorrad if the radio-operated key battery is empty or I have lost my radio-operated key?

If the battery of the radio-operated key is empty, you can start your BMW Motorrad by placing the spare key in the ring aerial under the seat. Proceed as follows to start the m...

Show full article

29377

How do I profit from the engine drag torque control (MSR) in the S 1000 RR (from model year 2023)?

During heavy braking manoeuvres, when the “rear becomes light”, the drag torque of the engine (depending on the engine-brake setting) is sufficient to create so much slip at the...

Show full article

23731

For the S 1000 RR (from model year 2023): What is the Dynamic Traction Control DTC with the new “Slide Control” function?

New to the Dynamic Traction Control DTC is the “Slide Control” function. It allows the rider to select two preset drift angles for the traction control when accelerating out of ...

Show full article

Loading

For the S 1000 RR (2023 model year): What requirements must be met to use the “Brake Slide Assist” function?